Qume DataTrak 8 Manual descargar pdf (Pagina 6)

----------------------------------------------------------------

SUBJECT: ENGINEERING CHANGE NOTICE # 9.

PRODUCT: DOUBLE D DISK CONTROLLER.

REVISION: BAND C REVISION BOARDS.

DATE: OCTOBER 6. 1980.

THE FOLLOWING JUMPER CONFIGURATION CAN BE USED WITH THE

SHUGART SA800/801 MODEL DISK DRIVE.

EACH DRIVE: A, B, C, Y, T2, HL, 800

DRIVE A: DSI

DRIVE B: DS2

DRIVE C: DS3

DRIVE D: DS4

LAST DRIVE: Tl, T3, T4, T5, T6

THE L JUMPER IS SET DEPENDING ON THE -5V SUPPLY.

CONSULT YOU SA800 MANUAL. USE NO OTHER JUMP PLUGS

IN THIS CONFIGURATION.

SIEMENS DISK DRIVE MODELS FD120-8B AND THE NEWER FD100-8D CAN

BE USED THE JADE DOUBLE D. EACH DRIVE MUST HAVE THE RADIAL

SELECT OPTION PLUG SET TO THE PROPER DRIVE NUMBER" 0 SELECTS

DRIVE A, 1 SELECTS DRIVE B, 2 SELECTS DRIVE C, AND 3 SELECTS

DRIVE D. ONLY THE LAST DRIVE ON THE RIBBON SHOULD CONTAIN THE

RESISTOR PACK. BE SURE TO REVIEW ECN #5. NO OTHER CHANGES ARE

NEEDED.

THE FOLLOWING PAGE DESCRIBES A TESTED JUMPER CONFIGURATION

FOR THE SHUGART SA850/851 WHEN USED WITH JADE RELEASE # 2 OF

CP/M 2.2.

1 2 3 4 5 6 7 8 9 10 11 ... 46 47

Sin comentarios

Qume DataTrak 8 Manual Pagina 6