Qume QVT-102 Guía de instalación descargar pdf (Pagina 18)

Here are explanations of all of the pertinent equates in the order

in which they appear.

FLOPPY5 - Set True if you have 5.25" drives; False if you do not

have 5.25" drives.

HEADS5 - Set to the number of heads of your 5.25" drives. Set

to 2 for CompuPro 5.25" drives.

TRK5 - Set to the number of tracks of your 5.25" floppy. Set

to 80 for CompuPro 5.25" drives.

FLPYORDR - Set to 0 if physical drive 0 should be the "A8"

drive in a floppy only system. Set to 2 if physical

drive 2 should be the "A8" drive in a floppy only

system, i.e. 5.25" drives. (Only values 0 and 2 are

valid. Has no effect on hard disks systems.)

DISK2 - Set to true if a DISK 2 is present. (Set to false if a

Disk3 is present.)

DISK3 - Set to true if a DISK 3 is present. (Set to false if a

DISK 2 is present.)

D2M20 - Set to true when using 20 Mbyte Fujitsu HD.

D2F40b - Set to true when using 40 Mbyte Fujitsu HD.

D3ST506 - Set to true when using 5 Mbyte ST506 HD.

D3Q520 - Set to true when using a 20 Mbyte Quantum HD.

D3Q540 - Set to true when using a 40 Mbyte Quantum HD.

D3Q80 - Set to true when using an 80 Mbyte Quantum HD.

NPCONS - Number of physical consoles.

VCOFF - Number of virtual consoles per physical console.

NLST - Number of list devices.

Z19 - Set to true if terminal type is Zenith Z-19. Only one

terminal can be set to true. The Zenith Z-19 is a

terminal without RAM paging capability for which

Digital Research has included drivers which emulate the

RAM paging in main memory. These drivers consist

mostly of equates which correspond to the terminal's

control codes. CompuPro includes them with the

distribution diskettes as an example for those who wish

to support screen switching on other terminals which do

not have RAM paging capability. CompuPro will not

assist in supporting terminals other than those mentioned

in this document.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Qume QVT-102 Guía de instalación Pagina 18